Thru-beam sensor LD28/LV28-F1-3057/35/47/115b
- Ultra bright LEDs for power on, weak signal indication and switching state
- Highly visible LED as alignment aid in receiver optics
- Delivery status: Light on switching
- Emitter deactivation
- Various transmitter frequencies
- Not sensitive to ambient light, even with switched energy saving lamps
- Waterproof, degree of protection IP67
- Protection class II
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for LD28/LV28-F1-3057/35/47/115b
| Produktbeskrivelse |
|---|
| Universal thru-beam sensor, large housing design, 65 m detection range, red light, 25 kHz transmission frequency, light/dark on, DC version, 2 PNP outputs, test input, fixed cable with M12 plug |
| System components | ||
|---|---|---|
| Emitter | LD28-F1-3057/35/76a/115b | |
| Receiver | LV28-F1-3057/35/47/115b | |
| General specifications | ||
| Effective detection range | 0 ... 65 m | |
| Threshold detection range | 90 m | |
| Light source | LED | |
| Light type | modulated visible red light , 660 nm | |
| Alignment aid | LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control |
|
| Transmitter frequency | F1 = 25 kHz | |
| Diameter of the light spot | approx. 1.3 m at 65 m | |
| Opening angle | Emitter 1.2°, Receiver 5° |
|
| Ambient light limit | 50000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 620 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 90 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, flashes in case of short-circuit | |
| Function indicator | LED yellow: 1. LED lit constantly: signal > 2 x switching point (function reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point |
|
| Control elements | sensitivity adjustment | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | Emitter: ≤ 50 mA Receiver: ≤ 35 mA |
|
| Input | ||
| Test input | emitter deactivation at +UB (Imax. < 3 mA at 30 V DC) | |
| Output | ||
| Switching type | light/dark on , preset to light-on | |
| Signal output | 2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 200 mA | |
| Switching frequency | 25 Hz | |
| Response time | 20 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| UL approval | cULus | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | fixed cable 230 mm with M12 x 1 male connector, 4-pin | |
| Material | ||
| Housing | Plastic ABS | |
| Optical face | Plastic pane | |
| Mass | 500 g (emitter and receiver) | |
| Dimensions | ||
| Height | 88 mm | |
| Width | 25.8 mm | |
| Depth | 54.3 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: LD28/LV28-F1-3057/35/47/115b
Product Documentation: LD28/LV28-F1-3057/35/47/115b
| Brief Instructions | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 240 KB |
Approvals: LD28/LV28-F1-3057/35/47/115b
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2135B | ALL | 309 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5629 | ALL | 229 KB | |
For første gang er en konsekvent løsningsserie med fotoelektriske funksjonsprinsipper og innovative teknologier tilgjengelig i identiske kapslinger. Brukere drar fordel av et uniformt driftskonsept over hele porteføljen. Oppdag seriene R100, R101, R103, R200 og R201 ...
Uansett om det er glass, silisiumskiver eller kretskort: Fotocellene i ML100-serien er spesiallaget for å oppfylle kravene til komplekse registreringsoppgaver. Lær mer om porteføljen ...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.