Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for
SC4-2 24VDC
| Produktbeskrivelse |
| Safety control unit |
| General specifications |
| Tests | IEC/EN 61496 |
| Safety type according to IEC/EN 61496 | 4 |
| Marking | CE |
| Operating mode | Start/restart disable, relay monitor, |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 3 |
| Performance level (PL) | PL e |
| Category | Cat. 4 |
| Mission Time (TM) | 20 a |
| PFHd | 1.98 E-9 |
| Type | 4 |
| Indicators/operating means |
| Diagnostics indicator | 7-segment display |
| Function indicator | LED red: OSSD OFF
LED green: OSSD ON LED yellow : Start readiness LED yellow (2x): indicator lamp channel 1 ... 2 |
| Stability alarm indicator | LED yellow flashing: Indicator lamp channel 1 ... 2 |
| Control elements | DIP switch |
| Electrical specifications |
| Operating voltage | 24 V DC, -15 %/+20 % |
| No-load supply current | 160 mA |
| Input |
| Activation current | approx. 10 mA |
| Activation time | 0.05 ... 1 s |
| Test input | Reset-input for system test |
| Output |
| Safety output | 2 relay outputs, force-guided NO-contact |
| Signal output | Output for displaying the switching state of the OSSDs |
| Switching voltage | 20 ... 230 V AC/DC |
| Switching current | AC: 0.01 ... 2 A DC see diagram of limit load curve |
| Response time | 30 ms |
| Approvals and certificates |
| Approvals | TÜV |
| Ambient conditions |
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals , lead cross section 0.2 ... 2 mm2 |
| Material | |
| Housing | Polyamide (PA) |
| Mass | 230 g |
| Dimensions | |
| Height | 99 mm |
| Width | 45 mm |
| Depth | 114.5 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27243101 |
| ECLASS 12.0 | 27243101 |
| ECLASS 11.0 | 27243101 |
| ECLASS 10.0.1 | 27243101 |
| ECLASS 9.0 | 27243101 |
| ECLASS 8.0 | 27243101 |
| ECLASS 5.1 | 27272790 |
| ETIM 9.0 | EC002538 |
| ETIM 8.0 | EC002538 |
| ETIM 7.0 | EC002538 |
| ETIM 6.0 | EC002538 |
| ETIM 5.0 | EC002538 |
| UNSPSC 12.1 | 46171620 |
Details:
SC4-2 24VDC
Product Documentation:
SC4-2 24VDC
Approvals:
SC4-2 24VDC
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
| EU TÜV SÜD | Z10110520068043 | ALL | PDF | 299 KB
|
Relaterte produkter:
SC4-2 24VDC
| Matching System Components |
|
|
|
| Sensing range up to 30 m, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Integrated alignment aid, Clearly visible LED functional display and pre-fault indicator on the receiver, Sturdy housing, Waterproof, degree of protection IP67, Operation on SB4-series control units (SafeBox), Construction type(S2): Rectangular type, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Connection: M12 connector, 4-pinfa |
|
+47 3557 3800