Distance sensor VDM35-6-L/20/115b/122
- Can be aligned using an integrated pilot laser
- Adjustable switch outputs
- Not sensitive to ambient light
- Analog output 4 mA ... 20 mA
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for VDM35-6-L/20/115b/122
| Produktbeskrivelse |
|---|
| Universal distance sensor, measurement to object, 6 m detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, fixed cable with M12 plug |
| General specifications | ||
|---|---|---|
| Measurement range | 0.2 ... 6 m | |
| Reference target | Kodak white (90%) | |
| Light source | laser diode | |
| Light type | modulated visible red light modulated infrared light |
|
| Laser nominal ratings | ||
| Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | Measuring laser: 1 Alignment laser: 2 |
|
| Wave length | Measuring laser: 905 nm Alignment laser: 650 nm |
|
| Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad | |
| Pulse length | Measuring laser: 6 ns Alignment laser: 0.25 µs | |
| Repetition rate | Measuring laser: 40 kHz Alignment laser: 1 kHz | |
| Maximum optical power output | Measuring laser: 1.8 W Alignment laser: 3 mW | |
| Measuring method | Time of flight measurement | |
| Diameter of the light spot | 4 mm x 12 mm at a distance of 6 m | |
| Ambient light limit | 5000 Lux | |
| Temperature influence | typ. ≤ 1.2 mm/K | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow: switching state (2x) , LED orange : Operating mode | |
| Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) | |
| Parameterization indicator | LED red (4x) | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC , class 2 | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 125 mA / 24 V DC | |
| Time delay before availability | ≤ 300 ms | |
| Output | ||
| Switching type | light/dark on, switchable | |
| Signal output | 2 PNP, short-circuit protected | |
| Switching current | max. 100 mA | |
| Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm | |
| Voltage drop | ≤ 2.4 V | |
| Deviation of the characteristic curve | typ. ≤ ± 40 mm | |
| Switching frequency | Fast: 40 Hz / Slow: 16 Hz | |
| Response time | Fast: 13 ms / Slow: 80 ms | |
| Repeat accuracy | Fast: ≤ ± 15 mm / Slow: ≤ ± 10 mm | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2 | |
| Standard conformity | ||
| Laser class | IEC 60825-1:2001 | |
| Approvals and certificates | ||
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | fixed cable 200 mm with M12 connector, 5 pin | |
| Material | ||
| Housing | ABS | |
| Optical face | PMMA | |
| Mass | 200 g | |
| Dimensions | ||
| Height | 93 mm | |
| Width | 95 mm | |
| Depth | 42 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM35-6-L/20/115b/122
Product Documentation: VDM35-6-L/20/115b/122
| Brief Instructions | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 946 KB |
Design / Simulation: VDM35-6-L/20/115b/122
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1524 KB |
Approvals: VDM35-6-L/20/115b/122
| Certificates | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB |
Discover the SmartRunner laser profile sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …
The R2000 provides reliable and extremely precise measuring results—with a gapless all-around visibility of 360° ...
R2300 integrerer 4 skanneplan i en og samme LiDAR sensor. I motsetning til skannere med bare 1 stråle, får man ut et virtuelt 3-D sskan fra R2300. Det resulterer i et mer detaljert og pålitelig måleresultat. Les mer om fordelene, teknologien, applikasjonene og produktet …
For første gang er en konsekvent løsningsserie med fotoelektriske funksjonsprinsipper og innovative teknologier tilgjengelig i identiske kapslinger. Brukere drar fordel av et uniformt driftskonsept over hele porteføljen. Oppdag seriene R100, R101, R103, R200 og R201 ...
With state-of-the-art technologies, the distance sensors offer the highest levels of precision and reliability ...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.