Teknisk support Industrielle sensorer
Kundeservice, eksplosjonsbeskyttelse
Ikke tilgjengelig for salg
Ikke tilgjengelig for salg

Diffuse mode sensor KT11-50/25/98a/103

KT11-50/25/98a/103
  • High operating distance up to 50 mm
  • Very small housing
  • Complete device, no amplifier needed
  • Voltage range 10 V ... 30 V DC, output current 100 mA short-circuit protected
  • Optical parts made of glass, easy cleaning
  • Degree of protection IP67

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:


Datablad utdrag: Tekniske data for  KT11-50/25/98a/103

Produktbeskrivelse
Diffuse mode sensor, M5 threaded housing design, stainless steel housing, front optical face, 50 mm detection range, infrared light, light on, PNP output, M8 plug
General specifications
Detection range0 ... 50 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourceLED
Light typemodulated infrared light
Optical facefrontal
Ambient light limit10000 Lux
Indicators/operating means
Function indicatorswitching state, LED yellow
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 %
No-load supply current≤ 15 mA
Time delay before availability≤ 20 ms
Output
Switching typelight-on
Signal output1 switch output PNP
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Switching frequency≤ 250 Hz
Response time≤ 3 ms
Compliance with standards and directives
Standard conformity
Product standardEN 60947-5-2:2007
IEC 60947-5-2:2007
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Mechanical specifications
Degree of protectionIP67
Connectionconnector (M8 x 1), 3-pin
Material
HousingStainless steel 1.4305 / AISI 303
Optical faceScratch resistant mineral glass lens
Mass9 g
Dimensions
Length45 mm

Classifications

SystemClasscode
ECLASS 13.027270903
ECLASS 12.027270903
ECLASS 11.027270903
ECLASS 10.0.127270903
ECLASS 9.027270903
ECLASS 8.027270903
ECLASS 5.127270903
ETIM 9.0EC001821
ETIM 8.0EC001821
ETIM 7.0EC001821
ETIM 6.0EC001821
ETIM 5.0EC001821
UNSPSC 12.139121528

Details: KT11-50/25/98a/103

Design / Simulation: KT11-50/25/98a/103

Velg språk:
CADSpråkFiltypeFilstørrelse
CAD-files 3-D / CAD-Dateien 3-DALLSTP128 KB

Relaterte produkter: KT11-50/25/98a/103

Accessories

Female cordset single-ended M8 angled A-coded, 3-pin, PUR cable greyfa
Fotoceller i R10x- og R20x-serien

For første gang er en konsekvent løsningsserie med fotoelektriske funksjonsprinsipper og innovative teknologier tilgjengelig i identiske kapslinger. Brukere drar fordel av et uniformt driftskonsept over hele porteføljen. Oppdag seriene R100, R101, R103, R200 og R201 ...

ML100-fotocelle

Uansett om det er glass, silisiumskiver eller kretskort: Fotocellene i ML100-serien er spesiallaget for å oppfylle kravene til komplekse registreringsoppgaver. Lær mer om porteføljen ...