Ikke tilgjengelig for salg
Redundancy Field Unit LB9513-PB0-0-0-1-0-0
- Standard enclosure for LB-System
- Max. 12 slots for I/O modules
- Installation in Zone 2 or safe area
- For PROFIBUS DP, PROFIBUS DP V1 and MODBUS RTU
- Redundancy (field bus and power supply)
- Impact resistance enclosure, IP66/NEMA 4X
- Packaged certified solution
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for LB9513-PB0-0-0-1-0-0
| Produktbeskrivelse |
|---|
| Redundancy Field Unit, Polyester (GRP) |
| General specifications | ||
|---|---|---|
| Installed components | backplane LB9029A | |
| Slots | ||
| Bus coupler | 2 | |
| Supply | 3 | |
| I/O modules (single width) | max. 12 | |
| I/O modules (dual width) | max. 6 | |
| Supply | ||
| Connection | screw terminals, max. 10 mm2 | |
| Rated voltage | 24 V DC | |
| Maximum safe voltage | 60 V | |
| Redundancy | yes | |
| Fieldbus connection | ||
| Fieldbus type | PROFIBUS DP/DP-V1 or MODBUS RTU , depends on bus coupler | |
| Connection | 9-pin Sub-D connector (not included with delivery) | |
| Redundancy | yes | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Impact resistance | EN 60079-0 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 40 °C (-4 ... 104 °F) | |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Relative humidity | < 75 % (annual mean) < 95 % (30 d/year), no moisture condensation |
|
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 | |
| Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance |
|
| Impact resistance | 7J | |
| Mechanical specifications | ||
| Enclosure cover | detachable cover with retaining screws | |
| Degree of protection | IP66, NEMA 4X | |
| Cable entry | power supply (Ex e): 2 x M25 bus (Ex e): 4 x M20 field signals (Ex i): 48 x M16 und 4 x M20 |
|
| Material | ||
| Housing | polyester , impact resistant, glass fiber reinforced | |
| Surface | black molded finish (RAL 9005) | |
| Cable gland | Polyamide (PA) | |
| Seal | silicone , one-piece | |
| Material thickness | enclosure body: 4 mm enclosure cover: 3 mm |
|
| Mass | approx. 10 kg , without modules | |
| Dimensions | (W x H x D) 544 x 271 x 210 mm (21.4 x 10.7 x 8.3 inch) |
|
| Height | 271 mm | |
| Width | 544 mm | |
| Depth | 210 mm | |
| Mounting | thru-holes Ø6.5 mm | |
| Data for application in connection with hazardous areas | ||
| Certificate | PF 16 CERT 1267 X | |
| Marking |  II 3(1/2)G Ex e nA [ia Ga/ib Gb/ic] IIC T4 Gc II 3(1/2)D Ex tc [ia Da/ib Db/ic] IIIC T135 °C Dc |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-15:2010 , EN 60079-31:2014 | |
| International approvals | ||
| Marine approval | ||
| Lloyd Register | 15/20021 | |
| DNV GL Marine | TAA0000034 | |
| American Bureau of Shipping | T1450280/UN | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210190 |
| ECLASS 12.0 | 27210190 |
| ECLASS 11.0 | 27210190 |
| ECLASS 10.0.1 | 27210190 |
| ECLASS 9.0 | 27210190 |
| ECLASS 8.0 | 27210190 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC000200 |
| ETIM 8.0 | EC000200 |
| ETIM 7.0 | EC000200 |
| ETIM 6.0 | EC000200 |
| ETIM 5.0 | EC000200 |
| UNSPSC 12.1 | 39121008 |
Details: LB9513-PB0-0-0-1-0-0
Function
This field unit is designed to meet the requirements of the most demanding industrial environmental applications.
Glass fiber-reinforced polyester provides corrosion resistance. It is easy to modify and light weight. The surface resistance avoids electrostatic charge.
It is equipped with plug-in slots for 6 dual width I/O modules or 12 single width I/O modules.
Any I/O module can be inserted into any slot, enabling a mixture of I/O types in one field unit.
The fieldbus and power supply are equipped with redundant connections.
Product Documentation: LB9513-PB0-0-0-1-0-0
| Safety and Security Documentation | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction manual | ENG | 137 KB | |
| Manuals | |||
| Manual | ENG | 5367 KB | |
Design / Simulation: LB9513-PB0-0-0-1-0-0
| CAE | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 655 KB |
| EPLAN macros LB-System / EPLAN-Makros LB-System | ALL | ZIP | 65808 KB |
The new LB/FB PROFINET gateways from Pepperl+Fuchs open the door for IIoT 4.0 applications in process industries.
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.