Base for read/write station, stainless steel version U-P6V4A-B6
- PROFIBUS DP acc. to EN 50170
- 2 PG screw fittings for IN and OUT supply
2 EMV PG screw fittings for BUS IN and OUT - Complete read/write functionality via the PROFIBUS DP
- Transmission of up to 7 double words, 32 bit each, in one cycle
- Connectable bus termination
- Field device with degree of protection IP67
- high-grade steel housing V4A
- Resistant against cleaning material
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datablad utdrag: Tekniske data for U-P6V4A-B6
| Produktbeskrivelse |
|---|
| Base for PROFIBUS DP, stainless steel version |
| Indicators/operating means | ||
|---|---|---|
| DIP switch | Setting the station address bus connection ON = active OFF = non-active |
|
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS , PELV | |
| Power consumption | max. 5 W with read/write head IPT*-FP | |
| Galvanic isolation | ||
| Operating voltage/interface | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff | |
| Interface | ||
| Physical | RS-485 | |
| Protocol | PROFIBUS DP acc. to EN 50170 | |
| Transfer rate | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 (only in connection with write/read head or cover ) | |
| Connection | screw terminals | |
| Interface cable | 2 x 0.64 mm2, double screened, acc. to PROFIBUS standard EN 50170 | |
| Supply | up to 3 x 1.5 mm2 | |
| Material | ||
| Housing | stainless steel V4A | |
| Dimensions | ||
| Height | 50 mm | |
| Width | 80 mm | |
| Length | 161 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280492 |
| ECLASS 12.0 | 27280490 |
| ECLASS 11.0 | 27280490 |
| ECLASS 10.0.1 | 27280490 |
| ECLASS 9.0 | 27280490 |
| ECLASS 8.0 | 27280490 |
| ECLASS 5.1 | 27279212 |
| ETIM 9.0 | EC002997 |
| ETIM 8.0 | EC002997 |
| ETIM 7.0 | EC002997 |
| ETIM 6.0 | EC002997 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 31162301 |
Details: U-P6V4A-B6
The base is used in combination with an upper part, the IPT*-FP read/write station.
The device is operated as a slave on the PROFIBUS DP. The device makes available the complete read/write functionality. Up to 32 bytes are transmitted per cycle. Of these, up to 7 double words, each with 32 bits, are available to the user.
The address is set and the terminating resistor for the bus is connected via DIP switches.
While the bus termination is switched on, the subsequent subscribers which are connected to the terminals (P, N out) are disconnected from the bus.
Datasheet: U-P6V4A-B6
| Datasheet | Filtype | Filstørrelse |
|---|---|---|
| 数据表 U-P6V4A-B6 | 173 KB | |
| Datasheet U-P6V4A-B6 | 701 KB | |
| Datenblatt U-P6V4A-B6 | 702 KB |
Documents: U-P6V4A-B6
| Manuals | Filtype | Filstørrelse |
|---|---|---|
| Manual IPTx-FP with U-P6x-B6x | 2364 KB | |
| Handbuch IPTx-FP mit U-P6x-B6x | 2471 KB |
CAD+CAE: U-P6V4A-B6
| CAD | Filtype | Filstørrelse |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 458 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: U-P6V4A-B6
| Declaration of Conformity | Filtype | Filstørrelse |
|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 108 KB |
Commissioning: U-P6V4A-B6
Software: U-P6V4A-B6
| Device Driver | Filtype | Filstørrelse |
|---|---|---|
| GSD file U-P6*-B6* / GSD-Datei U-P6*-B6* | ZIP | 2 KB |
Relaterte produkter: U-P6V4A-B6
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
Vi har utviklet en spesiell nettside som skal fungere som en kunnskapsbase for RFID-teknologi. Der finner du svar på vanlige spørsmål, og der kan du få informasjon om vanlige RFID-applikasjoner...
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.