Teknisk support Industrielle sensorer
Kundeservice, eksplosjonsbeskyttelse

Ikke tilgjengelig for salg

Dette produktet er erstattet med et annet.Gå til erstatningsprodukt NBN15-30GM60-I3
Ikke tilgjengelig for salg
Ikke tilgjengelig for salg

Inductive analog sensor IA15-30GM-I3

IA15-30GM-I3
  • Inductive analog
  • Non-flush mountable

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:


Datablad utdrag: Tekniske data for  IA15-30GM-I3

General specifications
Output typeAnalog current output
Installationnon-flush
Output polarityDC
Measurement range5 ... 15 mm
Output type3-wire
Nominal ratings
Operating voltage15 ... 30 V
Repeat accuracy0 ... 15 µm
No-load supply current≤ 10 mA
Functional safety related parameters
MTTFd2880 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Analog output
Output type0 ... 20 mA
Linearity error≤ ± 10 % of full-scale value
Load resistor≤ 500 Ω
Recovery time1 ... 10 ms , typ. 5 ms
Adjustment tolerance zero point≤ ± 10 % of full-scale value
Temperature drift≤ ± 0.1 %/K of full-scale value
Operating voltage≤ 0.5 %
Residual ripple± 30 µA
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
EN 60947-5-7:2003
IEC 60947-5-7:2003
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-10 ... 70 °C (14 ... 158 °F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross section0.5 mm2
Housing materialbrass, nickel-plated
Sensing facePBT
Degree of protectionIP67
Dimensions
Length60 mm
Diameter30 mm

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: IA15-30GM-I3

Product Documentation: IA15-30GM-I3

Velg språk:
Product informationSpråkFiltypeFilstørrelse
Installation conditionsENGPDF1054 KB

Design / Simulation: IA15-30GM-I3

Velg språk:
CADSpråkFiltypeFilstørrelse
CAD 3-D / CAD 3-DALLSTP48 KB

Approvals: IA15-30GM-I3

Velg språk:
CertificatesSertifikatnummerSpråkFiltypeFilstørrelse
Canada USA CSA Ordinary Location1007121ALLPDF99 KB
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3058BALLPDF1256 KB
UK Declaration of Conformity (P+F)TDOC-6108_ENGENGPDF1223 KB

Relaterte produkter: IA15-30GM-I3

Accessories

Mounting flange, 30 mmfa

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.