Teknisk support Industrielle sensorer
Spør produktsakkyndige
Kundeservice, eksplosjonsbeskyttelse
Spør produktsakkyndige
Industrielle Sensorer

Inductive sensor NJ40-FP-SN-P1

NJ40-FP-SN-P1
  • 40 mm non-flush
  • Usable up to SIL 3 acc. to IEC 61508

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datablad utdrag: Tekniske data for  NJ40-FP-SN-P1

General specifications
Switching functionNormally closed (NC)
Output typeNAMUR with safety function
Rated operating distance40 mm
Installationnon-flush
Assured operating distance0 ... 32.4 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.85
Safety Integrity Level (SIL)up to SIL3 acc. to IEC 61508 Danger! In safety-related applications the sensor must be operated with a qualified fail safe interface from Pepperl+Fuchs, such as KFD2-SH-EX1.
Consider the "exida Functional Safety Assessment" document which is available on www.pepperl-fuchs.com as an integral part of this product's documentation.
Output type2-wire
Nominal ratings
Nominal voltage8.2 V (Ri approx. 1 kΩ)
Switching frequency0 ... 100 Hz
Current consumption
Measuring plate not detected≥ 3 mA
Measuring plate detected≤ 1 mA
Functional safety related parameters
Safety Integrity Level (SIL)SIL 3
MTTFd7560 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
IECEx approval
Equipment protection level GbIECEx PTB 11.0092X
Equipment protection level DaIECEx PTB 11.0092X
Equipment protection level MbIECEx PTB 11.0092X
ATEX approval
Equipment protection level GbPTB 00 ATEX 2049 X
Equipment protection level DaPTB 00 ATEX 2049 X
UL approvalcULus Listed, General Purpose
CCC approval
Hazardous Location2020322315002308
NEPSI approval
NEPSI certificateGYJ16.1392X
KCC approval
Hazardous Location18-AV4BO-0478X
Ambient conditions
Ambient temperature-40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection typescrew terminals
Core cross sectionup to 2.5 mm2 , stripped insulation length: 7 mm
Connection (system side)screw terminals , M20 x 1.5 cable gland , usable thread length 10 mm , screw-in depth max. 10 mm
Housing materialPBT
Sensing facePBT
Degree of protectionIP68
Dimensions
Height40 mm
Width80 mm
Length80 mm
General information
Use in the hazardous areasee instruction manuals

Classifications

SystemClasscode
ECLASS 13.027274101
ECLASS 12.027274101
ECLASS 11.027272401
ECLASS 10.0.127272401
ECLASS 9.027272401
ECLASS 8.027272401
ECLASS 5.127272401
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NJ40-FP-SN-P1

Datasheet: NJ40-FP-SN-P1

DatasheetFiltypeFilstørrelse
Datasheet NJ40-FP-SN-P1PDF694 KB
Datasheet NJ40-FP-SN-P1PDF672 KB
Fiche de données NJ40-FP-SN-P1PDF678 KB
Datenblatt NJ40-FP-SN-P1PDF673 KB
Scheda tecnica NJ40-FP-SN-P1PDF677 KB
Datasheet NJ40-FP-SN-P1PDF724 KB
Folha de dados NJ40-FP-SN-P1PDF676 KB
Hoja de datos NJ40-FP-SN-P1PDF680 KB
Datasheet NJ40-FP-SN-P1PDF682 KB

Documents: NJ40-FP-SN-P1

Instruction manualsFiltypeFilstørrelse
ИнструкцииPDF186 KB
Návod k poużitíPDF179 KB
Instruktions manualPDF177 KB
Instruction manualPDF178 KB
Technical informationPDF158 KB
KasutusjuhendPDF172 KB
KäyttöohjePDF171 KB
Manuel d'instructionsPDF181 KB
BetriebsanleitungPDF179 KB
Technische InformationPDF162 KB
Οδηγίες χρήσηςPDF188 KB
HandleidingPDF178 KB
Instruction manual / BetriebsanleitungPDF176 KB
Használati útmutatóPDF181 KB
Manuale di istruzioniPDF179 KB
Lietošanas pamācībaPDF177 KB
Instrukciju vadovasPDF179 KB
Instrukcja obsługiPDF179 KB
Manual de instruçõesPDF181 KB
Manual de utilizarePDF181 KB
Návod na poużitiePDF179 KB
Navodila za uporaboPDF176 KB
Manual de instruccionesPDF181 KB
ManualPDF176 KB

CAD+CAE: NJ40-FP-SN-P1

CADFiltypeFilstørrelse
CAD 3-D / CAD 3-DSTP99 KB
CAD Portal / CAD PortalLINK---
EPLAN
CAE EPLAN Data Portal / CAE EPLAN Data PortalLINK---
EPLAN macro EDZ / EPLAN Makro EDZEDZ64 KB
Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

© 2024 Med enerett.

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.